UpOnly LearningFamily Homestead Guide

Home water testing and filters

Filter ads are everywhere, but the first step is free or low cost: find out what is in your water. This guide shows how to read your city water report or get a well tested, then how to compare filter types and read a certification label. We make no health claims and recommend no brands.

By Dr. Evan J. Hasson, Founder, UpOnly Learning · Last checked:

Text WhatsApp

Step 6 of 9

Quick answer: Test first. On city water, read your utility's yearly Consumer Confidence Report; on a private well, get a lab test every year. Then choose a filter certified to NSF/ANSI for the specific contaminant you want to reduce.

1. Test before you buy

No filter removes everything, and many do not remove germs at all. A filter only helps if it is certified for the thing you actually want to reduce. So the order is simple: learn what is in your water, then decide whether you need a filter and which kind.

Whole-house filter versus point-of-use filterStep 1: test firstRead your water quality report, or test well water at a labWhole-house filterAt the entry, for every tapFilterCity main or wellPoint-of-use filterUnder one sink, for one tapFilterCity main or wellFiltered waterNot filtered
Test first, then match a certified filter to what your test found. Sources: EPA, CDC and NSF.
  1. Find out where your water comes from: a public water system (city or town) or a private well.
  2. Get the facts: the yearly water report for city water, or a lab test for a well.
  3. Decide your goal: taste or smell, a specific contaminant, or nothing to change.
  4. Match any filter to a certification for that goal.
Safety: this page is general information, not health or medical advice. If a report or test shows a problem, or you have health questions about your water, contact your water utility or local health department.

2. City water: read your water report

If you pay a water bill, your utility must send you a Consumer Confidence Report (CCR) each year. The EPA says it is due by July 1. Many utilities post it online; search your utility's name and "water quality report".

What to look for:

  • Source: river, lake, reservoir or groundwater.
  • Detected contaminants table: what was found, the amount, and the legal limit for each.
  • Violations: any time the system broke a rule.
  • Disinfectant: chlorine or chloramine. This matters for hydroponics and for choosing a taste filter.
  • Lead information: how to learn about lead in service lines and how to get your tap tested.

The report covers the water the utility delivers. Pipes and fixtures inside a building are not part of it, so ask your utility about tap testing if you have older plumbing.

3. Private wells: get a lab test

No agency tests a private well for you. The CDC advises testing every year for:

  • Total coliform bacteria
  • Nitrates
  • Total dissolved solids (TDS)
  • pH

Test again after a flood, after repairs to the well or pump, and when a baby joins the home. Your state or county health department can point you to a certified lab and may share which local contaminants to add to the test.

How it usually works: the lab sends sterile bottles and instructions. You collect the sample exactly as directed, often from a kitchen tap with the aerator removed, and return it within the time window. Results come back with your levels next to the standards.

Well water is often hard. That matters for kettles, laundry and hydroponic gardens.

4. Whole-house vs point-of-use filters

Filters come in two big groups.

Whole-house (point-of-entry)Point-of-use
WhereWhere water enters the home, so it treats every tapAt one tap: pitcher, faucet mount, refrigerator, under-sink or reverse osmosis unit
Common goalsSediment, chlorine taste and smell, hardness (softeners) for the whole houseDrinking and cooking water at one sink
UpkeepLarger cartridges or media; may need a plumber to installSmaller cartridges changed more often; usually do-it-yourself
Questions to askDoes the whole house need it, or only the drinking water? Is it certified for my goal?Is it certified for my contaminant? How often do cartridges need changing?

Many households only need to treat drinking and cooking water, if anything. Your test results, not the ads, should decide.

5. Read NSF/ANSI certification

A certification mark means an independent group tested the product against a public standard. The CDC and NSF both advise checking two things: the standard number, and the specific contaminant the product is certified to reduce.

StandardWhat it covers, in plain terms
NSF/ANSI 42Aesthetic effects such as chlorine taste and smell
NSF/ANSI 53Specific health-related contaminants, each listed separately, such as lead
NSF/ANSI 58Reverse osmosis systems

How to read a label:

  1. Find the certification mark and the standard number.
  2. Find the list of contaminants the product is certified to reduce. If your contaminant is not on the list, the product is not certified for it.
  3. Check the rated capacity and cartridge life.
  4. Look the product up in the certifier's online listing to confirm.

"Tested to" or "meets the standard" is not the same as "certified to". For lead, the EPA publishes a short guide to finding filters certified to reduce lead. Many filters do not remove microbes, so a filter is not a fix for a well with bacteria.

6. Keep any filter working

  • Change cartridges on the schedule in the manual. A used-up cartridge stops doing its job.
  • Write the change date on the housing or in a phone reminder.
  • Keep softened water for laundry and bathing if you garden. Softened water adds sodium, which builds up in hydroponic solutions and pots.
  • Retest a well every year, even if you have a filter.
Learn together: find your city water report online, or your well test results. Have your student pick three items from the table and make a bar chart of the amount found next to the limit. Talk about what each word means, and that this is a reading and graphing activity, not a health test.

Learn together: lessons for your student

Want your student to learn the science behind this page? These UpOnly Learning lessons are part of Garden and Homestead Science in our Life Skills library. Each one has a hands-on activity, safety notes and 120 practice questions, in English, Spanish and Portuguese.

Questions people ask

How do I get my well water tested?

Contact your state or county health department for a list of certified labs. The lab sends bottles and instructions, you collect the sample, and the results compare your levels with the standards. The CDC advises testing every year.

Do I need a whole house water filter?

It depends on your test results and your goal. Many homes only need to treat drinking and cooking water, if anything. Test first, then pick a product certified for the specific contaminant.

What does NSF/ANSI 53 mean on a water filter?

It is a standard for reducing specific health-related contaminants, such as lead. The product is only certified for the contaminants listed on its label, so check that your contaminant is named.

Where can I find my city water quality report?

Your water utility publishes a Consumer Confidence Report every year, due by July 1. Look on the utility's website, on your bill, or call and ask for a copy.

Check what you know

Five quick questions for you, the grown-up. Tap each one to see the answer.

  1. What should you do before buying a water filter?

    • A. Pick the most expensive one
    • B. Test your water or read your water report
    • C. Buy a whole-house system
    Show the answer

    B. Test your water or read your water report A filter only helps if it is certified for something that is actually in your water.

  2. By what date is the yearly city water report due?

    • A. January 1
    • B. July 1
    • C. December 31
    Show the answer

    B. July 1 The EPA says Consumer Confidence Reports are due each year by July 1.

  3. How often does the CDC advise testing a private well?

    • A. Every year
    • B. Every 10 years
    • C. Only when it tastes bad
    Show the answer

    A. Every year Yearly tests for coliform, nitrates, TDS and pH, and again after floods or repairs.

  4. A filter is certified to NSF/ANSI 53, but lead is not on its list. Is it certified for lead?

    • A. Yes, 53 covers everything
    • B. No, check the specific contaminant claim
    • C. Only if it is a pitcher
    Show the answer

    B. No, check the specific contaminant claim Certification covers only the contaminants named for that product.

  5. Which statement about filters and germs is true?

    • A. All filters remove microbes
    • B. Many filters do not remove microbes
    • C. Only pitchers remove microbes
    Show the answer

    B. Many filters do not remove microbes The CDC notes many filters are not designed to remove germs.

Sources

A guide, not a rulebook. Local rules for animals, water and food vary by city, county and state. Check yours, and follow tested, official methods for canning and water testing. UpOnly Learning does not sell or recommend any product.

Text WhatsApp

UpOnly Learning is a private educational publisher, not a school. We award no grades, credits or diplomas, we are not accredited, and nothing we publish satisfies a legal requirement on its own.

Each topic names the standard it addresses. That alignment is UpOnly Learning's own reading of the published standards; the people who own those standards do not review or endorse what we publish, and standards change.